|
Post by rushy on May 18, 2015 18:01:36 GMT
|
|
ianmc
Junior Member
Posts: 61
|
Post by ianmc on May 18, 2015 18:30:40 GMT
|
|
|
Post by rushy on May 18, 2015 19:05:42 GMT
Yes I use those Ian but on the end of the Korum running rigs. But as they don't have a swivel Eye on you can't thread your line through them , well you can but I'm sure you know what I mean ?
|
|
ianmc
Junior Member
Posts: 61
|
Post by ianmc on May 18, 2015 19:23:17 GMT
yes i thinkso.... i used to use lots of components in my barbel rigs but after a few things failed i decided to go back to basics and use very few now.. my chub fishing consists of a lump of playdo a splitshot and a hook
|
|
|
Post by johnboy66 on May 18, 2015 19:46:30 GMT
just bought a packet of these for my carp fishing at starbeck tackle shop 20 in a pack for £2.99
Rushy with these you can clip and unclip both your hooklink and your line depending which one you prefer without any messing.
Rushy I recommend mate.
|
|
ianmc
Junior Member
Posts: 61
|
Post by ianmc on May 18, 2015 19:56:17 GMT
|
|
|
Post by bra1n on May 19, 2015 11:00:53 GMT
Yes I use those Ian but on the end of the Korum running rigs. But as they don't have a swivel Eye on you can't thread your line through them , well you can but I'm sure you know what I mean ? So don't be tight and buy some swivels as well Just a word of warning on these, use a sleeve with them or the hook length can end up coming adrift.
|
|
binner
Junior Member
Posts: 66
|
Post by binner on May 22, 2015 11:12:53 GMT
agree with brian, use quick links and add a swivel for you feeders and cover with a bit of tube
|
|
|
Post by rushy on May 22, 2015 14:02:47 GMT
agree with brian, use quick links and add a swivel for you feeders and cover with a bit of tube I will give it a go. The quick links are certainly easier to operate and a more positive lock than the good old snap link swivels ........ old habits die hard eh
|
|
binner
Junior Member
Posts: 66
|
Post by binner on May 22, 2015 17:07:23 GMT
find some small/narrow gauge/sharp quick links and add one to the swivel loop on your lead, then use it to pierce pva mesh bags you dont get the pendulum effect on the cast then with the lead also sliding up the line
|
|